Sheet-metal STEP to DXF flat pattern online
Get a DXF flat pattern from a sheet-metal STEP. Upload the model, check thickness and review the result.
- Bend allowances based on radius, thickness and K-factor
- Contours, holes and bend lines on separate DXF layers
- Geometry validation and subsequent editing in the CAD editor
Your files, your result
No sign-in or payment card. Files are private and temporary, for up to 24 hours.
By using the tool you accept the terms of service. Privacy policy.
Drop your files here
or choose them from your device
STEP · STPThree steps to move forward
- 01
Upload your files right here.
- 02
Enter the necessary details and review the result.
- 03
Download the prepared output.
Sheet-metal flat pattern with bend allowances
Supported parts have constant thickness, planar sections and full-width cylindrical bends. Bend allowance is angle × (inner radius + K × thickness). DXF contains closed cutting contours, holes and a separate bend layer. Curves may be approximated by polylines. For a multi-body STEP, process the selected body.
This is not a manufacturing CAM flat pattern. Freeform surfaces, stamped features, variable thickness, closed cycles, cuts through bends or overlaps may be rejected. Default K-factor 0.42 is an estimation assumption that must be checked against material and tooling. Manufacturing reliefs, bend order and springback are not automatically resolved.
Frequently asked questions
Can I use the tool without an account?
Yes. You can use the tool directly on this page without registering.
How is bend length calculated?
Along the neutral axis using inner radius, angle, thickness and K-factor. K-factor is not a universal material constant; the default is only an estimation assumption.
Can the result be used for manufacturing?
No. Results are for estimation only, not manufacturing or machine control. STEP is marked in its filename and header; DXF also has visible text outside the contour. Manufacturing requires separate professional validation and manufacturing documentation.